NT-MINI-T16/T32

The NT-MINI-T16/T32 is a high-speed 16/32-channel adjustable pulse output EtherCAT slave module designed for machine vision and AOI camera/strobe synchronization. Key Features: Fast 100Mbps EtherCAT bus with Distributed Clocks (DC, min. 200us cycle) • Precision programmable pulse width (2μs to 1s) • 5V TTL/CMOS compatible outputs for camera exposure and LED strobe control • Easy network daisy-chaining for multi-camera expansion • Compact 58×125×68mm DIN-rail form factor.

Send Email Inquiry Now

Introduction

NT-MINI-T16 / NT-MINI-T32 Technical Specifications
System & Fieldbus Parameters
Product Models	NT-MINI-T16 (16 Channel) / NT-MINI-T32 (32 Channel)
Product Series	NT-Mini Series Special Application Block
Fieldbus Protocol	EtherCAT (100 Mbps)
Distributed Clocks (DC)	Supported (Min. Cycle Time: 200 μs)
Power Supply	24V DC
Dimensions (W×H×D)	58 × 125 × 68 mm
Pulse & Strobe Trigger Features
Output Channels	16 Channels or 32 Channels High-Speed Pulse Output
Digital Output Level	5V Level (TTL / CMOS Compatible)
Pulse Width Adjustment	2 μs ~ 1 s (Programmable)
Main Applications	Camera Exposure Triggering, Light Source Strobe Control, AOI Machine Vision Systems
Module Cascading	Supported via Ethernet Cable (Daisy-chain for Multi-Camera Expansion)
Environmental Specifications
Operating Temperature	0°C ~ 60°C
Relative Humidity	95%, Non-condensing

Factory Tour

Send Message

Related Products

NT-MINI-ENC2

The NT-MINI-ENC2 is a compact 2-channel high-speed EtherCAT encoder acquisition module engineered for precise position feedback tracking. Highlights: 2-channel differential AB-phase encoder inputs supporting up to 5MHz frequency • Direct IPC Ethernet connection and universal EtherCAT PLC master compatibility • Optimized for material handling, lithium battery production, and conveyor belt tracking • Space-saving 58×125×68mm DIN-rail form factor.

NT-MINI-ENC2O2

Designed for dual-axis fly-shooting and micro-dispensing, the NT-MINI-ENC2O2 delivers deterministic hardware-level position comparison over EtherCAT. Highlights: 2-channel AB-phase differential encoder inputs • 2-channel high-speed RS422 output triggers for direct camera or laser synchronization • Real-time position compare logic bypassing host CPU latency for AOI and precision assembly • Ultra-compact 58×125×68mm DIN-rail footprint.

NT-MINI-ENC4O4

The NT-MINI-ENC4O4 is an EtherCAT slave module featuring 4-channel high-speed encoder inputs and 4-channel RS422 position compare trigger outputs engineered for multi-axis vision-on-the-fly applications. Key Features: 4-channel differential AB-phase encoder acquisition • 4-channel RS422 level differential outputs for real-time position comparison • 100Mbps EtherCAT bus communication • Engineered for simultaneous multi-camera AOI inspection, high-speed dispensing, and automated assembly • Compact 58×125×68mm DIN-rail form factor.

NT-MINI-T16/T32

NT-MINI-ENC1O16

The NT-MINI-ENC1O16 is a dedicated EtherCAT high-speed position compare and camera trigger module engineered for rotary indexing tables and conveyor vision inspection. Key Features: 1-channel differential AB-phase encoder input (up to 64-bit counter with 5V DC 200mA output) • 12-channel high-speed latch inputs for sensor capture • 16-channel outputs for multi-camera synchronous triggering • Built-in offset trigger logic for spatial delay inspection • Compact 58×125×68mm DIN-rail form factor.

NT-Mini Series Block Digital I/O

The NT-Mini Series Block Digital I/O provides high-density, compact EtherCAT remote I/O solutions with flexible NPN/PNP input configuration and robust short-circuit protected MOS outputs. Key Features: High-speed 100Mbps EtherCAT slave with Distributed Clocks (DC, min. 50us cycle time) • Multiple channel options (Up to 32 DI/DO, Break-Hold output option available) • Direct PC/IPC Ethernet connection support • Ultra-compact 58×125×68mm DIN-rail design.

NT-MINI-ADI8/16-HP

The NT-MINI-ADI8/16-HP is a high-density EtherCAT current analog input module supporting 8 or 16 channels with 16-bit resolution. Key Features: Fast 100Mbps EtherCAT bus with Distributed Clocks (DC, min. 500us cycle) • High-precision current measurement (-20mA to +20mA) • Direct PC/IPC Ethernet port control support • Space-saving 58×125×68mm DIN-rail form factor.

NT-MINI-ADV8/16-HP

The NT-MINI-ADV8/16-HP is a high-density EtherCAT voltage analog input module supporting 8 or 16 channels with 16-bit resolution. Key Features: Fast 100Mbps EtherCAT bus with Distributed Clocks (DC, min. 500us cycle) • High-precision voltage measurement (-10V to +10V) with 2kS/s sampling rate • Direct PC/IPC Ethernet port control support • Space-saving 58×125×68mm DIN-rail form factor.